Let’s look at locks

by admin on January 31st, 2012

From the beginning of the human person have felt the urge to protect what they own. They started by closing the entrance to the cave with the stone, then gold and jewels they hid in the ground. Then they found the key. It was first made of wood and rope. They serve the purpose very well, although they are not very well designed. There is plenty of historical evidence that authorize the use of key long before we could imagine. Even in the Bible (Old Testament, the Book of Judges) we often mention the lock and key.

Type

In modern society we have the key and the key to everything: homes, offices, cars, bicycles. We even have more than one lock to the same building; lock and keys become a part of our daily routine that we do not take them into consideration (or perhaps we do so only when the key ring was too heavy to put in our pockets). But we give a lot of thought when we must choose the type of key or key type. Basically we are talking about a mechanical key (based on the activation of mechanical keys) electro-mechanical lock (can be either mechanical or electrical activated, but normally the key is replaced by the number key that must be pressed) and electric lock (activated by a key card that has a specific code, programmed to be read by the card reader, which is controlled by central or local processor automatically).

How to pick locks?

This is not as complicated as we think, but also not as easy as it appears in many movies. Some people say that it requires art and science. We must have good knowledge of the lock mechanism and, in practice. First we enter the key tensions in the key (example:  a screwdriver) and, with a slight pressure, rotate the connector (cylinder lock) as the correct key will be (we should find out what the normal direction to the button will change). This will help create a small spot between the key pins (placed in the key). Then we must put the key in choosing to raise them (such as the right key will do when inserted in the lock). Doing this and continue to put pressure on the key tension we will hear a click a bit (made by the pins when they fall in the right position) and the lock will open.

To lock a sophisticated, we can use as a metal hair pins took the key. But a professional locksmith will need to select an adequate tool kit. Basically it contains the key tensions (they have the shape and size) and some pick (a long piece of metal that curved up at one end). Some may choose to use electric guns (with long pieces of metal and when they vibrate push pin ups and unlock).

Key Re keying

Retyping process is quite simple (takes several minutes) and should not be confused with the process of replacing the key. Actually it consists of disassembling the cylinder lock and replaces all the old pin lock with a new one, to match the new key. Then the cylinder is reproduced in the hole! When for example a family member loses the house key we can assume that the robber had it. We must immediately return house key lock to prevent potential theft. It does not cost much in time and money, but we can spend some big stress. The same procedure is recommended when moving into a new house / apartment. The better are the key, the harder it will become a thief to break in!




Leave a Reply

XHTML: You can use these tags: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

*